• Technology
  • CFO.com | US

Spreadsheets: Forecasting Seasonal Data with Excel

Production forecasting with Excel usually entails using straight-line regression. But you'll need to tweak your formulas if you want to incorporate seasonal sales data into the mix. Here's an easy way to run the numbers.


Editor’s Note: To read more about spreadsheets, share a tip with other readers, or suggest a topic for Bill Jelen to cover in an upcoming column, click here to visit CFO.com’s Spreadsheet Tips Page.

During my Forecasting and Planning Webcast on June 24, I was demonstrating how to use straight-line regression to forecast production. Viewer W.D. asked how to adapt this method when there is seasonality in the sales data. W.D. wins a copy of the new Learn Excel 2007-2010 from CFO and MrExcel for his question.

Consider the data in Figure 1. This shows five years of historical data and a straight-line forecast. The R-Squared value shown on the chart is 0.0999, which means that straight-line forecasting is not going to yield an accurate forecast.

1. Start with sales data by month for several years. It is important that the historical data contain a multiple of 12 months. I used five years of history in this example. The data could run from January 2006 through December 2010, or it could run from July 2007 through June 2011. The important part is that every month is represented by the same number of annual data points. If you have five Decembers, then you should have five Junes. Having five of some month and six of other months will skew the seasonal indices.

2. Select one cell in the data and choose Insert, Pivot Table, OK.

Fig. 1

MrExcel June 29-Fig1

 

You can use a pivot table to calculate the seasonal indices. To do that, follow these steps:

3. Move the date field to the Row Labels. Add historical sales to the Values area. You will have a pivot table identical to the original data set.

4. Select one of the date cells in the pivot table. Select Group Field from the Options tab of the ribbon as shown in Figure 2.

Fig. 2

MrExcel June 29-Fig2

 

5. In the Grouping dialog, choose only Months. I always say that you should never choose Months without also choosing Years; however, calculating seasonal indices is the one time that you can choose only Months (Figure 3).

Fig. 3

MrExcel June 29-Fig3

 

6. You want to change the pivot table to show averages, as well as the numbers as a percentage of the column total. This is easier in Excel 2010. In Excel 2010, choose one of the sales cells. Open the Summarize Values By dropdown and choose Average. Open the Show Values As dropdown and choose % of Column Total (Figure 4). Select the Active Field box and type a name such as Seasonal Indices. On the Design tab, open the Grand Total dropdown and choose Off For Rows and Columns.

Fig. 4

MrExcel June 29-Fig4

 

In Excel 2007, you should select one sales cell. Click the Field Settings icon. Type a Custom Name of Seasonal Indices. Choose Average in the Summarize Values By tab. Switch to the Show Values As tab and choose % of Column Total. Click OK.

You will now have a pivot table that shows the seasonal index for each month. If the average monthly sales is 100%, then the value in each month shows how that month compares to the average. In Figure 5, you can see that January is 54.8% of the average month and December is 256.19% of the average month.

Fig. 5

MrExcel June 29-Fig5

 

Deseasonalize the Historical Data
Next, you should divide each sales figure by the seasonal index for that month. The formula in Figure 6 (below) uses a few clever tricks to do this quickly. The INDEX function points to the 12 seasonal indices. It uses MONTH(A2) to return the number 1 for January, 6 for June, 12 for December, and so on.

Fig. 6

MrExcel June 29-Fig6

 

Create a Forecast from the Deseasonalized Data
You can now use any of the straight-line forecasting tools on the deseasonalized data. (I covered four methods of straight-line forecasting during the Webcast. This article will show only one method. You can use any of the desired methods.)

Add month headings for future months below the historical months in column A. The syntax for the FORECAST function is =FORECAST(x,Known_y’s, Known_x’s), as illustrated in Figure 7, below. In this case, the Known Y is the range of historical sales, the Known X is the range of months, and X is the month that you are forecasting.

Fig. 7

MrExcel June 29-Fig7

 

Seasonalize the forecast by multiplying the FORECAST function by the seasonal index for that month. The formula in column E is the opposite of the formula in column C. Instead of dividing by the seasonal indices, you multiply by the seasonal index for the month (see Figure 8, below).

 

 

 

 

 

Fig. 8

MrExcel June 29-Fig8

 

The outcome in Figure 9 is the result of the three-step deseasonalize, forecast, then seasonalize process. The red-dotted series is the future forecast. Compare this to the regular straight-line forecast in Figure 1.

Fig. 9

MrExcel June 29-Fig9

 

CFO contributor Bill Jelen is the author of 32 books on Excel, including Pivot Table Data Crunching. You have the chance to win a copy of one of his books by posting a question to the Community Center on the right. If Bill selects your question as the topic of a future column, we’ll send you a book as a thank-you. Bill’s next MrExcel Webcast, on consolidating data for financial reporting, is Thursday, July 14, at 2:00 Eastern Time.

One thought on “Spreadsheets: Forecasting Seasonal Data with Excel

  1. IS it possible to send a copy of the actual excel file of this example. I want to test this but do not have all the data available as all year’s data is not displayed in the example?

Discuss

Your email address will not be published. Required fields are marked *